Geeetech Me Creator User Manual page 2

1. Power Supply Wiring
1. Take out the power supply, there is a 110V/220V switch on it. Please make sure that the switch
is at the correct position according to the residential electricity standard of your country.
2. Loosen the screws, and connect power lines to corresponding ports in turn under the instructions
of the colors of power lines and the marks on DC power supply.
3. take note of the colors and their corresponding connection as a mistake can cause you harm or
damage the printer.
professional.
BROWN
BLUE
GREEN /
YELLOW
RED
BLACK
Shenzhen Getech Technology CO.LTD
www.geeetech.com
If you are unsure of your skills and abilities here, please consult a
Live (L)
Neutral (N)
Ground (GND)
Positive (+)
Common (COM)