Set Mode; Set Mode Programming - Icom IC-M35 Instruction Manual

■ Set mode programming

Set mode is used to change the conditions of transceiver's
functions: Beep tone function, Priority scan function
resume timer , Auto scan function
†
Monitor key action, Automatic backlighting, LCD contrast
setting, Power save function, Squelch sensitivity, Low fix
function* and Noise detection function.
* Appears only when the optional battery case is attached; not avail-
able with German version depending on the pre-setting.
† Not available with Holland version.
D SET MODE ITEMS
• Noise detection • Beep tone
• Low fix*
• Squelch sensitivity
• Power save
, Scan
†
, Dual/Tri-watch function
†
(The display shows the current settings, and the selected item is displayed in the dotted circle.)
• Priority scan
Starting item
: Push or +
: Push +
• LCD contrast
D Set mode operation
q Turn power OFF.
, w While pushing [VOL/SQL MONI], turn power ON to enter
†
the set mode.
• "bP" appears.
e Push [VOL/SQL MONI], or push [Y]/[Z] while pushing
and holding [VOL/SQL MONI] to select the desired item.
r Push [Y]/[Z] to select the desired condition of the item.
t To exit the set mode, push [16 C].
† • Scan resume timer
*Appears only when the optional
battery case is attached; not
available with German version
depending on the pre-setting.
Not available with Holland version.
†
• Automatic
backlighting

SET MODE

†
• Auto scan †
• Dual/Tri-watch
• Monitor key action
7
1
2
3
4
5
6
7
8
9
10
11
12
13
†
14
15
16
17