Scan Operation (Except Holland Version); Scan Types - Icom IC-M35 Instruction Manual

5
SCAN OPERATION

■ Scan types

Scanning is an efficient way to locate signals quickly over a
wide frequency range. The transceiver has priority scan and
normal scan.
In addition, the auto scan function is available for standby
convenience. This function can be activated depending on
the setting in the set mode. (p. 18)
PRIORITY SCAN
CH 01
CH 88
CH 05
Priority scan searches through all TAG channels in se-
quence while monitoring Channel 16. When a signal is
detected on Channel 16, scan pauses until the signal
disappears; when a signal is detected on a channel other
than Channel 16, scan becomes Dualwatch until the sig-
nal disappears.
14
CH 02
CH 16 CH 03
CH 04
(Except Holland version)
Set the TAG channels (scanned channels) before scanning.
Clear the TAG for unwanted channels which inconveniently
stop scanning, such as those for digital communications.
(p. 15)
Choose the desired scan type from "Priority" or "Normal"
in the set mode. (p. 18)
NORMAL SCAN
CH 01
CH 88
CH 05
Normal scan, like priority scan, searches through all TAG
channels in sequence. However, unlike priority scan,
Channel 16 is not checked unless Channel 16 is set as a
TAG channel.
CH 02
CH 03
CH 04