Icom IC-M35 Instruction Manual page 5

BE CAREFUL!
The transceiver's right-side panel will be-
come hot when operating continuously for long periods of
time.
BE CAREFUL!
The transceiver meets IPX7* require-
ments for waterproof protection. However, once the trans-
ceiver has been dropped, waterproof protection cannot be
guaranteed because of possible damage to the transceiver's
case or the waterproof seal.
* Only when the BP-251 (option) or BP-252, flexible antenna,
[SP MIC] cap is attached.
MAKE SURE
to turn OFF the transceiver power before
connecting or disconnecting the supplied or optional acces-
sory.
Icom is not responsible for the destruction or damage to the
Icom transceiver, if the malfunction is because of:
• Force majeure, including, but not limited to, fires,
earthquakes, storms, floods, lightnings, or other natural
disasters, disturbances, riots, war, or radioactive
contamination.
• The use of Icom transceiver with any equipment that is not
manufactured or approved by Icom.
Icom, Icom Inc. and Icom logo are registered trademarks of Icom Incorporated
(Japan) in Japan, the United States, the United Kingdom, Germany, France,
Spain, Russia, Australia, New Zealand, and/or other countries.
iv