Table of Contents
Advertisement
installation
|
18
1) Open the main top door and the center door on the front of the unit.
2) Remove the bricks from the fl oor of the fi rebox.
3) Remove the ash dump cover plates (one inside the fi rebox and one on
the underside of the fi rebox - access the lower plate through the center
door - it is directly below the upper ash dump plate.) by removing the
two nuts and bolts holding the 2 plates together from underneath the
stove.
Ash Dump Plates
18 |
Regency CS2400 Freestanding Wood Stove
918-935
ASH DRAWER OPTION
ASH DRAWER INSTALLATION
4) Push the ash plug into the hole inside the fi rebox and replace all the bricks
5) Position ash drawer lid in 'Open' position on the ash drawer lid (towards
6) Slide in ash drawer.
7) Close center door and main top door- once ash drawer is in place.
Ash Plug
Keep ash removal tool handy for maintenance - see ash disposal in
operating instructions.
1
except for the brick over the ash plug. See brick diagrams in manual.
the front) as shown below.
CS2400
Ash drawer
lid
07/06/10
Advertisement
Table of Contents
