Initialize Menu - Canon lbp5970 Getting Started Manual

11
Settings
Press [Settings].
SETUP
CONTROL MENU
12
Utility
Select INITIALIZE MENU using [
press [OK].
Settings

INITIALIZE MENU→

OK
OK?
A confirmation message is displayed.
13
OK Press [OK].
INITIALIZING
DONE
IMPORTANT
If the message <INITIALIZE FAIL> appears when the initialization of the
SETUP menu is executed, the SETUP menu is not initialized.
14
After completing the initialization, perform a hard reset or
cycle the power of the printer.
After starting the printer, the hard disk is formatted.
While the hard disk is being formatted, <FORMATTING> is displayed in the display.
Wait for a moment until the format is completed.
After the format of the hard disk is completed, connect all the interface cables.
Downloaded from ManualsPrinter.com Manuals
→
] and [ ], then
IMPORTANT
The hard disk is formatted automatically after you install the hard disk,
initialize the SETUP menu, and start the printer. If the format is not
performed at this point, perform QUICK FORMAT in HDD MAINTENANCE
in the SETUP menu. For more details, see "Chapter 5 Printing
Environment Settings" in User's Guide.
CD-ROM
NOTE
After installing the hard disk, you have to specify the settings for the
optional accessories in the [Device Settings] sheet in the printer driver. You
can obtain the status of the optional accessories automatically by clicking
[Get Device Status] in the [Device Settings] sheet.
If you cannot obtain the status of the optional accessories automatically,
select the [Hard Disk Installed] check box.
Step
8
65