Canon lbp5970 Getting Started Manual page 61

Raise the slot cover a little
c
arrow .
c
b
IMPORTANT
• Do not touch the main board parts, printed wire, or connectors with your
hands.
•
When installing RAM/ROM, be careful so that any metal objects such as
screws do not touch the main board.
•
Do not drop screws, paper clips, staples, or other metal objects inside the
printer. If any of these objects should drop inside the printer, do not plug
the power plug into the AC power outlet and contact your local authorized
Canon dealer.
•
Do not turn the printer ON without the rear cover or slot cover attached.
This may result in damage to the printer.
Step
8
Downloaded from ManualsPrinter.com Manuals
60
b
, then remove the slot cover in the direction of the
NOTE
The positions where the RAM/ROM modules are to be installed are as
shown in the following figure. Confirm the mounting locations before
installing the RAM/ROM modules.
6
Install RAM/ROM.
● Installing RAM
Open up the levers (A) of the RAM slot.
RAM slot
ROM slot