Precautions For Handling - Canon lbp5970 Getting Started Manual

- An environment where the temperature and/or humidity can change
dramatically, or where condensation occurs
- A poorly ventilated room (Ozone is generated by the printer in use,
however, the amount is too small to be harmful to the human body.
However, if you are going to use the printer for a long time in a poorly
ventilated room or to perform a large amount of printing, ventilate the
room to keep the working environment comfortable.)
- A location near products that generate magnetic waves or
electromagnetic waves
- In rooms such as laboratories where chemical reactions occur
- A place where salt content, corrosive gases such as ammonia, or toxic
gases are contained
- A platform that may warp from the weight of the printer and optional
accessories, or the printer is liable to sink (such as a carpet or mat)
Dimensions of the Printer
The dimensions of each part of the printer are indicated in the following figures.
For details on the dimensions of the printer with the optional paper feeder
installed, see "Installing a Paper Feeder," on p. 49.
Front Surface
45 258
Toner cover
160
Paper cassette
Tray extension
Auxiliary tray
Multi-purpose tray
636.5 651
Installation Space
Select an installation location where you can secure the following amounts of
free space around the printer, and a surface that can support the weight of the
printer. The dimensions of the space required around the components and the
positions of the feet are as follows.
For details on the installation space of the printer with the optional paper feeder
installed, see "Installing a Paper Feeder," on p. 49.
Downloaded from ManualsPrinter.com Manuals
6
(mm)
Top cover
Front cover
230
Required Peripheral Space
Front Surface
740
Paper
cassette
1526
Foot Positions
Front Surface
The rubber feet are 6 mm high, and dimensions of the top surface are 15 mm x 23 mm for the
front feet, and 24 mm x 10 mm for the rear feet.

Precautions for Handling

CAUTION
If an error should occurred to the hard disk in the printer unit, the
received, recorded, and saved data may be deleted. It is
recommended not to record or save important data on the hard disk.
Canon assumes no responsibility whatsoever for any damages or
losses arising from data loss by the customers.
(mm)
(mm)
Top cover
Front cover
135
(mm)
63 442.7 101.3
63 442.7 101.3