Removing The Packing Materials - Canon lbp5970 Getting Started Manual

Removing the Packing Materials

Step
1
This printer is provided with tape and packing materials to be protected from
excessive vibrations and shocks during delivery. Remove the tape and packing
materials after the printer is carried to the installation site.
IMPORTANT
•
If there is any packing material remaining inside the printer, this may result
in poor print quality or damage to the printer when operating the printer. Be
sure to remove all the packing materials following the procedure.
•
The removed packing materials are required when transporting the printer
for relocation or maintenance. Keep them where they will not get lost.
NOTE
The packing materials may be changed in form or position to be placed, or
may be added or removed without notice.
Downloaded from ManualsPrinter.com Manuals
14
1
Remove the tape attached to the printer. You will remove the
tape (A) later.
(A)
IMPORTANT
Dispose of the packing materials according to local regulations.
NOTE
Remove the tape that secures the rear cover while supporting the rear
cover by hand as shown in the figure.