11
Raise the lever on the front edge of
the staple box.
12
Replace the front edge lever.
I Discarding punch waste (when a punch unit is installed)
1
Press the detach button and separate
the saddle stitch finisher from the
machine.
The saddle stitch finisher and the
Caution
machine are connected at the rear.
Exercise caution when pulling them
apart.
2
Gently pull the punch waste
receptacle forward and discard the
punch waste.
79l
If the leading staple is
bent, be sure to cut it off.
If a bent staple is used
for stapling, a staple jam
will result.
Empty the punch waste
receptacle into a
garbage bag or other
container, taking care
not to let punch waste
scatter.
13
Push in the staple box.
14
Push in the stapler section.
15
Close the front cover.
16
Push the saddle stitch finisher back
onto the machine.
Make a test print or copy in staple
Caution
sort mode to verify that stapling
takes place correctly.
3
Replace the punch waste receptacle.
4
Push the saddle stitch finisher back
onto the machine.
Push the staple box all
the way in until you hear
a "click".