Misfeed In The Lower Paper Tray - Olivetti d-Copia 2301 Operation Manual

MISFEED IN THE LOWER PAPER TRAY

Make sure that there is no misfed paper in the machine before pulling the tray out. (p.66)
Use the following procedure to remove misfeeds that occur in the 500-sheet paper feed unit or 2 x 500-sheet paper
feed unit.
1
Open the lower side cover.
2
Remove the misfed paper.
3
If the misfed paper is not visible in
step 2, lift and pull out the lower paper
tray and remove the misfed paper.
4
Replace the lower paper tray.
Push the lower paper tray in completely.
5
Close the lower side cover.
Be careful not to tear the
misfed paper during
removal.
Be careful not to tear the
misfed paper during
removal.
Make sure that the
misfeed message is
cleared.
TROUBLESHOOTING AND MAINTENANCE
5
69