Olivetti d-Copia 2301 Operation Manual page 100

Developer system
Light source
Resolution
Gradation
Power supply
Power consumption
Overall dimensions
(with bypass tray folded)
Weight
Dimensions
Operating conditions
Noise level
Emission concentration
(measured according to
RAL-UZ62)
* The first-copy time and warm-up time may vary depending on the power-supply voltage, ambient temperature, and other
operating conditions.
As a part of our policy of continuous improvement, OLIVETTI reserves the right to make design and specification
Note
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Magnetic brush development
Xenon lamp
Scan: 400 dpi Output: 600 dpi
Scan: 400 dpi Output: 1200 dpi
Scanning: 256
Printing: 2 value
Local voltage ±10% (For this machine power supply requirements, see the name
plate located on the back of the machine.)
Max. 1.4 kW
623 mm (W) x 609.5 mm (D) (24-17/32" (W) x 24" (D))
Approx. 47 kg (103.7 lbs.) (Not includes toner cartridge)
623mm (W) x 609.5mm (D) x 785.5mm (H)
(24-17/32" (W) x 24" (D) x 30-15/16" (H))
Temperature: 15°C to 30°C (59°F to 86°F), Humidity: 20% to 85%
Sound Power Level L (1B=10dB)
wA
Copying: 6.3[B]
Standby: 3.6[B]
Sound Pressure Level L
pA
Copying: 50[dB(A)]
Standby: 25[dB(A)]
Sound Pressure Level L
pA
Copying: 51[dB(A)]
Standby: 20[dB(A)]
Noise emission measurement in accordance with ISO 7779.
3
Ozone: 0.02 mg/m or less
3
Dust: 0.075 mg/m or less
3
Styrene: 0.07 mg/m or less
(AUTO/TEXT/PHOTO mode)
(SUPER PHOTO mode)
(bystander positions)
(operator position)
APPENDIX
7
81