Olivetti d-Copia 2301 Operation Manual page 88

USING THE SADDLE STITCH FINISHER FUNCTIONS
I Using the saddle stitch finisher functions in copy mode
Touch the [OUTPUT] key in the main screen of copy mode to display the screen for selecting saddle stitch
finisher functions. Selections include the sort function, staple sort function, saddle stitch function, group function,
and output tray.
OUTPUT
SORT
STAPLE
SORT
GROUP
[GROUP] key (p.3)
1
Select this function to have output grouped by
page.
[STAPLE SORT] key (p.3)
2
Select this function to have output collated into
sets and stapled. The output is delivered to the
offset tray (without being offset).
[SORT] key (p.3)
3
Select this function to have output collated into
sets.
Icon display
4
When the sort, staple sort, group, or saddle stitch
function is selected, the corresponding icon
appears here.
[OFFSET TRAY] key (p.1)
5
Select this key to have output delivered to the
offset tray. (When the staple sort function is
selected, the offset tray is automatically selected.)
[CENTER TRAY] key
6
Select this key to have output delivered to the
center tray.
When the saddle stitch finisher is disabled in the key operator programs, the saddle stitch
Caution
finisher functions cannot be used (p.15).
OFFSET TRAY
CENTER TRAY
OFFSET
OK
SADDLE
STITCH PUNCH
The displayed menu will vary
depending on the country and
regions.
[OK] key
7
Touch this key to close the screen and return to
the main screen.
[OFFSET] key (p.3)
8
When a checkmark appears, the offset function
operates. When the checkmark is removed, the
offset function does not operate. (The offset
function does not operate when the staple sort
function or the saddle stitch function is selected.)
[SADDLE STITCH] key (p.3)
9
Each set of output is stapled along the centerline
of the paper and folded.
When this function is selected, the "Pamphlet
copy" function is automatically selected.
When "AUTOMATIC SADDLE STITCH" is
Note
disabled in the key operator programs, the
"Pamphlet copy" is not automatically
selected (p.15).
[PUNCH] key (p.4)
10
When a punch unit is installed, select this key to
punch holes in the output.
* When a function is selected, it is highlighted.
79e