Rear-Facing Installation; Luas Installation - Britax BOULEVARD User Manual

BRITAX Child Safety, Inc.

Rear-Facing Installation

LUAS Installation

1. Remove the lower
connectors from the
storage slots in the base.
Press the adjuster release
button and pull the strap
to full length. Repeat for
the second strap.
2. Attach the anti-rebound
bar (see page 26).
3. Recline the unoccupied
child seat to position 3
and place rear-facing on
the vehicle seat (see page
24).
4. Firmly press the lower
connectors onto the
adjacent lower anchors
until a click confirms
attachment.
5. Push the child seat
down while pulling each
lower connector strap to
tighten.
8
Rear-Facing Installation with LUAS
9 Check that all connections are secure and straps are not
twisted.
9 Ensure that the anti-rebound bar is properly installed
(see page 26).
9 Check that the child seat cannot be moved front to back
or side to side more than 2.5 cm (1 in.) at the belt path.
If the child seat is not secure, repeat installation or use a
different seating location.
9 Check that the back angle of the child seat is 30° – 45°
from vertical (not to exceed 45°) when the car is parked
on a level surface. See "Seat Positions" on page 24.
1
BOULEVARD Canadian User Guide
9