Using The Lower Connectors; Impact Absorbing Tether - Britax BOULEVARD User Manual

Hide thumbs Also See for BOULEVARD:
Table of Contents

Advertisement

Available languages

Available languages

BRITAX Child Safety, Inc.

Using the Lower Connectors

Locating the Lower Connectors
The lower connectors are located in the back of the base of
the child seat. Store the connectors in the slots when not in
use.
To attach the lower connector to the storage slot or
lower anchor:
1. Firmly push the lower
connector into the slot or
lower anchor until a click is
heard.
NOTE: The lower
connectors store top down
in the slots.
To remove the lower connector from the storage slot or
lower anchor:
1. Press and hold the red
release button.
2. Pull the lower connector
from the storage slot or
lower anchor.
28
Top
BOULEVARD Canadian User Guide

Impact Absorbing Tether

Failure to follow the guidelines below may cause the
child seat not to perform as intended.
• The tether must be used at all times when installing
this child seat forward-facing� Using the tether will
improve the stability of your child seat and reduce the
risk of injury.
• Attach the tether only to tether anchors identified by
your vehicle manufacturer as tether anchorage points.
Only use the designated tether anchor for each seating
position.
• If your vehicle does not currently have a tether anchor
attachment, refer to your vehicle owner's manual or
contact your vehicle man u fac tur er for assistance. DO
NOT modify your vehicle without advice from your
vehicle manufacturer.
• Store the tether in the pouch on the back of the child
seat when not in use. DO NOT install the child seat with
the tether attached to the carry clip.
Tether anchor locations vary from
vehicle to vehicle. Check your vehicle
owner's manual and look for the tether
anchor symbol shown in the diagram
to help identify where the top tether
anchor points are located in your
vehicle.
Using the Tether
To attach the tether to a tether anchor:
1. Firmly press the hook over
the tether anchor point.
2. Pull the loose end of the
webbing to remove slack
from the tether.
NOTE: If the tether is
too short for use in your
vehicle, contact BRITAX
Consumer Services at
1-888-427-4829 or 1-704-
409-1699 to obtain a tether
extender.
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents