Harness Buckle - Britax BOULEVARD User Manual

BRITAX Child Safety, Inc.
5. Slide the head restraint
cover over the front of
the head restraint and
attach the hook and loop
fasteners at the back.
Attach the elastic straps
to the rear tabs.
6. Attach the hook and loop
fasteners on the head
restraint cover around the
harness straps.

Harness Buckle

If your child eats and drinks while in the child seat, you will
need to check the buckle periodically and rinse out any
accumulated debris.
Removing the Harness Buckle
1. Lift the cover from the
seat to find the buckle
strap connection.
2. Remove the buckle strap
by turning the buckle
retainer sideways and
routing it out of the front
buckle slot in the child
seat.
3. Slide the end of the belly
pad over the foam pad on
the seat.
38
BOULEVARD Canadian User Guide
4. Pull the end of the belly
pad and buckle retainer
out of the slot in the cover
to remove.
5. Turn the buckle retainer
sideways and route the
buckle assembly out of
the belly pad.
Replacing the Harness Buckle
1. Turn the buckle retainer
sideways and route it
through the fabric strip on
the belly pad.
2. Route the belly pad and
buckle retainer through
buckle slot in the cover.
– Ensure that the buckle
is through the correct
cover slot for the buckle
position.
3. Slide the end of the belly
pad over the comfort
foam on the child seat.
4. Turn the buckle retainer
sideways and route it
through the front buckle
slot and then into the
desired buckle position
(see page 22).
– Ensure that the buckle
is in the correct buckle
position.
5. Replace the cover.
1
3
4
39