Installing Network Card; Installing The Network Card To The Printer - Oki PAGE 12i User Manual

2. INSTALLING NETWORK CARD

2. INSTALLING NETWORK CARD

2.1 Installing the Network Card to the Printer

The Network card can be affected by static electricity. Do not remove it
from the antistatic bag until you are ready to install it.
For further memory expansion, two SIMM (Single IN-line Memory Mod-
ule) slots are provided on the Network card.
The SIMM1 slot on the Network card is used for installation of a
1,2,4,8,16,32 MB D-RAM SIMM.
The SIMM2 slot on the Network card is used for installation of the Font
option SIMM or Macro option SIMM.
Do not mount D-RAM SIMM (expansion memory) on SIMM2 slot.
Do not mount Font option SIMM or Macro option SIMM on SIMM1 slot.
A case of adding Font option SIMM or Macro option SIMM or D-RAM
SIMM on the Network card or, do so prior to installing the Network card in
the printer Install D-RAM SIMM on SIMM1 expansion slot before Font
option SIMM or Macro option SIMM is mounted on SIMM2 expansion
slot. Install Font option SIMM or Macro option SIMM on SIMM2 expan-
sion slot after D-RAM SIMM is mounted on SIMM1 expansion slot.
1. Insert the module firmly in the slot with 30 angle as shown.
2. Then bring the module upright to a 90 angle as shown.
4
Font option SIMM or
Macro option SIMM
D-RAM SIMM
SIMM2
SIMM1