Oki PAGE 12i User Manual page 68

from the left column. Set the print server operating mode from
the given options on the right.
5 If you are running a NetWare 4.x network,click the NetWare
Directory Services icon from the left column. Select NDS Tree
Name from the pull-down menu and enter the Print Server
Context.
6 Click the Queues icon from the left column to bring up the Queues
screen and then click the Change button.
7 Select the desired queues from the list of Available Queues to be
added into services. Click the Service button to move the selection
to the Serviced Queues column. When all queues have beed
added,click OK.
8 Click OK again to return to the main screen.
4.1.5.2 Setting TCP/IP environment
Procedure
1 From the main JetAdmin screen,select the OKIPAGE 12i you want
to configure.
2 Select Modify from the Device menu.
3 On the Configuration screen,select the General tab and enter the
print server name and description.
4 Select the TCP/IP tab and set the print server IP configuration.
4.1.5.3 Setting AppleTalk environment
Procedure
1 From the main JetAdmin screen,select the OKIPAGE 12i you want
to configure.
2 Select Modify from the Device menu.
3 Under the Optional tab,select Mac.
4 Enter the AppleTalk name and click OK.
4.1.5.4 Obtaining Diagnostic Information
Procedure
1 From the main JetAdmin screen,select the OKIPAGE 12i you want
to view diagnostic information.
2 Select Properties from the Device menu.
3 From the Properties screen,select the appropriate tab to view the
4. ADMINISTRATING PRINTERS IN NETWORK
63