Oki PAGE 12i User Manual page 49

4. ADMINISTRATING PRINTERS IN NETWORK
Telnet provides the following commands:
Command
show address
show connection
show queue
show status
show protocol
set address
set address ip
set address mask
set address gateway
set protocol
switch user
kill
reset
help
quit
• After the settings are made with the set command, they become
valid when you log out the Telnet.
• The kill command severs the connection with the Connection No.
that has been specified with N of "kill N ". The executed command
becomes valid when this command ends.
• The reset command forcefully severs all the connections that are
currently connected and initializes. This command becomes valid
when you log out the Telnet. The execution of this command affects
the use of this network card significantly. Therefore, exercise cau-
tion in executing this command.
Next, the operation procedure of the Telnet Client is explained. In the
explanations, [RET] means to press the Return key.
Here, an example is given in which Telnet is used in Windows95 and
printer's IP address is 192.36.253.96 and this network card's MAC Ad-
dress is 00808704106C.
44
Shortened
Display all address
shaddr
Display all connection
shconn
Display print queue
shq/lpq
Display status
shstat
Display Protocol Setting
shpro
All address Setting
seaddr
seaddr ip IP address Setting
Subnet Mask Setting
seaddr
mask
Gateway Setting
seaddr
gate
Protocol info. Setting
sepro
Switch user
su
Kill connection
kill
Reset connection
reset
Display command help
help
Exit from telnet
logout/exit
Meaning Restrictions
root only
root only
root only
root only
root only
root only
root only