Install The Toner Cartridge - Canon IR1018 series Quick Start Manual

Install the Toner Cartridge

1
Remove the plastic case from the box.
4
B
A
Pull the toner cartridge lever (A) towards you and
insert the cartridge into the machine with the
arrow (B) pointing towards the machine.
8
Close the front cover.
CAUTION
– Be careful not to get your fingers caught.
– If you cannot close the front cover, do not force it to
close. Open the cover and make sure the toner
cartridge is properly set in the machine.
3
Downloaded from ManualsPrinter.com Manuals
2
Open the case and remove the toner cartridge.
Keep the box and case for future use.
5
Holding the cartridge steady with one hand, pull
out the seal completely with the other hand.
NOTE
Do not pull out the seal at an angle.
NOTE
If the cartridge is already set in your machine, begin
with step 5.
A
C
B
CAUTION
– Do not touch the portions (A) and (B).
– Do not pull out the seal (C) before inserting the
cartridge into the machine as the toner may spill
out.
6
A
Turn the cartridge lever (A) as far as it will go
counterclockwise.
3
Open the front cover.
7
Push down the lever.
4