Install Toner Cartridge - Canon imageCLASS MF4100 Series Starter Manual

Install Toner Cartridge

1
Remove the toner cartridge from the bag.
Keep the bag for future use.
4
A
B
Lift the scanning platform until it is locked (A),
and open the printer cover (B).
8
Close the printer cover and lower the scanning
platform.
5
A
CAUTION
Do not open the drum protective shutter (A).
5
A
Hold the toner cartridge by its handle (A).
CAUTION
– Be careful not to get your fingers caught.
– If you cannot close the printer cover, do not force it
to close. Open the cover and make sure the toner
cartridge is properly set in the machine.
2
Gently rock the toner cartridge several times to
distribute toner inside.
6
Align the guide (A) on the left side of the toner
cartridge with the groove inside the machine.
3
Pull out the seal completely.
NOTE
Do not pull out the seal at an angle.
7
Push the toner cartridge to make sure it is
properly set in the machine.
6