Uninstallation Procedure - Canon IR1018 series Quick Start Manual

Uninstallation Procedure

Before you uninstall the driver, make sure of the following:
● You have the installation software available for installation.
● No application is running on your computer.
NOTE
– To uninstall the software in Windows 2000/XP/Server 2003, you must be
the user with administrative privileges.
– When uninstalling the software, first uninstall the iR Toolbox, and then
the iR drivers.
Removing the iR Drivers
3 1
Click [Exit]. Click [start] on the
Windows task bar →
[(All) Programs] →
[Canon] → [iR1018 1022
1023] → [Uninstall
Drivers].
The [iR Drivers Uninstaller] dialog
box appears.
Bundled Programs on the User Software CD
● Canon Cover Sheet Editor
The Canon Cover Sheet Editor enables you to create original fax cover sheet templates for use with a
Canon fax driver. For details, see online help for this program.
● NetSpot Device Installer (NSDI)
NetSpot Device Installer enables you to set up the machine for network operations.
For details, see the Readme file and online help for this program.
● Canon Font Manager
Canon Font Manager is utility software that allows you to install and uninstall fonts, etc..
For details, see the Readme file for this program.
● PCL Barcode
30 barcode scalable fonts are included. For details, see the Readme file for this program.
To use these programs, double-click the .exe file for each program, then follow the on-screen
instructions.
For Canon Cover Sheet Editor and NetSpot Device Installer, you can also click [Additional Software
Programs] on the CD-ROM Setup screen to use them.
NOTE
Canon Font Manager and PCL Barcode are available only for PCL printer users.
33
Downloaded from ManualsPrinter.com Manuals
2
Click [Delete].
Uninstalling the iR Toolbox
1 2
Click [start] on the Follow the on-screen
Windows task bar →
instructions.
[(All) Programs] →
[Canon] → [iR Toolbox
4.9] → [Toolbox
Uninstall].
3 4
Click [Yes]. Click [Exit].
Uninstallation proceeds
automatically and next dialog box
appears.
When the Repair or Remove program
selection screen is displayed, check
[Remove], then click [Next >].
If asked to confirm removal of an
application etc., click [Remove].
Restart your computer if asked to do
so.
NOTE
Restart your computer if asked to
do so.
34