Determining If Forms Tear-Off Is Off Or On - Oki ML420 User Manual

Determining if Forms Tear-Off is Off or On

There are two ways to determine the status of the Forms
Tear-Off menu setting:
• Print the Menu.
• Use the TEAR key.
To print the Menu:
1 Make sure paper is loaded.
2 Hold (2), then press
SHIFT
3 Press (4) to print the menu.
PARK
4 Look for the Form Tear-Off setting in the paper feed group
you are using (Rear Feed, Bottom Feed or Top Feed—Forms
Tear–Off appears in the Top Feed group only if the optional
Roll Paper Stand is installed).
(1) to enter the Menu Mode.
SEL
To use the TEAR key:
1 Make sure paper is loaded.
2 Press (3).
TEAR
• If the paper moves up, Forms Tear-off is off.
• If the paper moves down, Forms Tear-off is on.
13
Using Your Printer