Second Thread Tension Connection/Disconnection - JUKI LK-1900AN Engineer's Manual

(20) Second thread tension connection/disconnection

1. Loosen the set screw 2 .
2. Remove the two set screw 4 .
3. Move the AT link unit (front) 3 downwards (in the direction of the Arrow A ), and pull out the pin block
5 from the hole of the thread tension releasing pin 6 of the second thread tension 1 .
4. Pull out the second thread tension 1 to remove it. (Arrow B )
5. For reassembly, follow the steps of 4. to 1. above.
Procedures of disassembling/assembling
– 28 –