JUKI LK-1900AN Engineer's Manual page 77

8) CP-8 (Software version display)
The software versions of the MAIN and SDC boards are displayed.
Each version comes in the type description of RR-VV-LL-xx. "xx" is used for the specifications of special or-
dering. It is not displayed usually.
(Example: 01-01-01, 01-01-02, 01-02-01)
1. Operation
RR-VV-LL-xx display for the MAIN and SDC boards for each item selection LED
X enlarge
Pattern LED
LED
MAIN board MAIN board
RR VV
According to the item selection LED, RR-VV-LL-xx of the MAIN
and SDC boards is respectively displayed. Changeover is possible
by pressing the
the table below.
Display changeover is possible with the
RR → VV → LL → (xx) → for the MAIN board and RR → VV → LL
→ (xx) → for the SDC board.
Y enlarge
Speed LED
LED
MAIN board MAIN board
LL xx
– 65 –
key. Contents of the display are shown in
Counter Bobbin
LED winder LED
SDC board SDC board
RR VV
key in the order of
Threading
Tension LED
LED
SDC board SDC board
LL xx