6) INT board
The INT board repeats the head sensor signals and transfers the head model data to the MAIN board.
CN64:
Presser bar lifter origin (black)
CN66:
Thread trimmer operation (red)
CN65:
Needle thread clamp origin
Needle thread clamp operation
(yellow)
The head model type (Memory switch No. 241), corrected value of the active tension, the number of
stitches for grease-up (Memory switch No. 245), etc. are stored.
CN62: X feed origin (red)
CN63: Y feed origin (yellow)
CN67: Fall switch (red)
– 71 –