TP-Link Archer MR200 User Manual page 58

Chapter 11
2. Go to Advanced >
according to your wireless client.
3. Keep the default WPS status as Enabled and select the
4. Enter the client device's PIN in the field on the above WPS screen. Then click the
Connect button.
5. Connect successfully
device has successfully connected to the router.
Method 3 Enter the router's PIN on your client device
Use this method if your client device asks for the router's PIN.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to
Advanced
5GHz according to your wireless client.
3. Keep the Router's PIN status as enabled. Take a note of the Current PIN of the router.
You can also click the
4. On the client device, enter the router's PIN. (The default PIN is also labeled on the
bottom of the router.)
5. The WPS LED flashes for about two minutes during the WPS process.
6. When the WPS LED is on, the client device has successfully connected to the router.
Note:
Wireless >WPS page. Select the wireless network 2.4GHz or 5GHz
will appear on the above screen, which means the client
> Wireless > WPS page. Select the wireless network 2.4GHz or
Generate button to get a new PIN.
Specify Your Network Settings
PIN Code radio button.
54