Use Quick Setup Wizard; Create A Connection Profile - TP-Link Archer MR200 User Manual

Chapter 4
4. 1.

Use Quick Setup Wizard

To set up your router with several easy steps quickly:
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Click
Quick Setup, confirm the parameters with the information provided by your
ISP and click Next.
Note:
Quick Setup is not available if your SIM card is locked. Unlock your SIM card according to the prompt.
3. Follow the on-screen instructions to complete the setup.
Note:
1. During the quick setup process, you can change the preset wireless network name (SSID) and wireless password.
Once done, all your wireless devices must use the new SSID and password to connect to the router.
2. The router supports two operation modes, 3G/4G Router Mode and Wireless Router mode. If you already have a
modem or your Internet comes via an Ethernet cable from the wall, you can set up the router as a regular wireless
router to share the Internet. Refer to
4. 2.

Create a Connection Profile

If your ISP settings are not detected by the router, you can create an Internet connection
profile by following the steps below:
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to
Advanced
3. Click Create Profile.
4. Specify the Profile
and Authentication Type
Appendix B: Troubleshooting
> Network > Internet
Name, Username and Password. Select the
according to your ISP.
Set Up Internet Connections
for details.
page.
PDP Type, APN Type
15