Schedule Your Wireless Function - TP-Link Archer MR200 User Manual

Chapter 11
1. The WPS LED on the router will light green for five minutes if the device has been successfully added to the
network.
2. The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuring the WPS.

11. 4. 3. Schedule Your Wireless Function

You can automatically turn off your wireless network (both 2.4GHz and 5GHz) at time
when you do not need the wireless connection.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced
3. Select the 2.4GHz wireless network to configure. Toggle on the button to enable
the Wireless Schedule feature.
> Wireless > Wireless Schedule
Specify Your Network Settings
page.
55