TP-Link Archer MR200 User Manual page 68

Chapter 11
8 ) Enter the Pre-Shared Key
keep Perfect Forward Secrecy
Note:
The key should consist of visible characters without blank space.
Make sure Site A and Site B use the same key.
9 ) Leave the Advanced
OK to save.
3. Configuration on Site B (remote network). Refer to step 2
configuration on Site A and make sure that Site A and Site B
use the same pre-shared keys
settings.
4. The
Status column will change to
has been set up successfully.
5. 5. Check the VPN connection. You can ping site B' LAN IP
from your computer to verify that the IPSec VPN connection
is set up correctly.
Tips: To check the VPN connection, you can do the following.
a . On the host in Site A, press
Run dialog. Input "cmd" and hit
b . In the CLI window, type in "ping 192.168.2.x" ("192.168.2.x"
can be IP address of any host in Site B). Then press [Enter].
Specify Your Network Settings
for IKE authentication. Then
enabled.
Settings as default value. Then click
and Perfect Forward Secrecy
Up if the VPN connection
[Windows Logo]
OK.
+ [R] to open
64