Change The Administrator Account - TP-Link Archer MR200 User Manual

Chapter 12
previous settings from the backup file when needed. Moreover, if needed you can erase
the current settings and reset the router to the default factory settings.
To back up configuration settings:
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Click Advanced >
3. Click Backup to save a copy of the current settings to your local computer. A conf.
bin file will be stored to your computer.
To restore configuration settings:
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Click Advanced >
3. Click Browse to locate the previous backup configuration file, and click
4. Wait for the restoring and then the router will automatically reboot.
To reset the router to factory default settings:
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Click Advanced >
3. Click Factory Restore
4. Wait for the resetting and then the router will automatically reboot.
Note:
1. Do not interrupt or turn off the router during the resetting process.
2. We strongly recommend you to back up the current configuration settings before resetting the router.

12. 4. Change the Administrator Account

Admin account is used to log in to the router's web-based management page. You are
required to set the admin account at the first login. You can change it on the web page.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to
Advanced
Management section.
System Tools > Backup & Restore
System Tools > Backup & Restore
System Tools > Backup & Restore
to reset the router.
> System Tools> Administration
Administrate Your Network
page.
page.
Restore.
page.
page. Locate the Account
69