Transport; Storage; Maintenance And Care; Maintenance Schedule - Kärcher BR 30/4 C User Manual

Pour out dirt water.
The rinse the dirt water reservoir with
clear water.
Replace the lid of the waste water res-
ervoir and lock it.
Insert the waste water container into the
appliance.
Emptying the Fresh Water
Reservoir
Remove the fresh water reservoir from
the appliance.
Open the cover of the fresh water reser-
voir.
Pour out the cleaning liquid.
Close the cover of the fresh water res-
ervoir.
Insert the fresh water container into the
appliance.

Transport

Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport it.
Swivel the appliance handle forward
and arrest in the park position.
Swivel the pushing handle backwards
and push the appliance.
or
Lift appliance by the carrying handle
and carry it.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Storage

Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Maintenance and care

Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Caution
Risk of damage to the appliance on ac-
count of water leakage. Empty the waste
water reservoir and the fresh water reser-
voir prior to performing maintenance on the
appliance.

Maintenance schedule

After the work
Caution
Risk of damage. Do not wash down the ap-
pliance with water and do not use aggres-
sive detergents.
Empty the dirt water reservoir.
Clean the seals between the waste wa-
ter reservoir and the appliance.
Empty the fresh water reservoir.
Rinse the appliance: Fill the fresh water
reservoir with clear water (without de-
tergent) and let the appliance run for
one minute with the brush water supply
turned on.
Empty the fresh water reservoir.
Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
Clean the vacuum bar, check for wear
and replace if required (see "Mainte-
nance tasks").
Check the brush for wear and replace if
required (see "Maintenance tasks").
Yearly
Have the prescribed safety inspection
carried out by an electrician.
– 4
EN 15