Moving The Printer A Long Distance; Storing The Printer For Long Periods Of Time - Oki B6100 User Manual
Oki printer user guide b6100
Hide thumbs
Also See for B6100:
- Technical manual (516 pages) ,
- User manual (70 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
4-10
Oki B6100 User Guide
Storing the Printer for Long Periods of Time
Moving the Printer a Long Distance
Use the following procedure to move the printer a long distance:
1.
Turn the printer off by pressing the [ O ] on the power switch on the right side of the
printer.
2.
Unplug the AC power cord from the wall outlet and from the back of the printer.
3.
Disconnect the printer from the host computer.
4.
Remove the paper from all of the paper trays.
5.
Wait 30 minutes for the printer to cool.
6.
Remove all installed paper-handling options. Refer to Chapters 6 through 9 for instruc-
tions for removing installed paper-handling options.
7.
Remove the toner cartridge and place it in an opaque plastic bag, then seal the bag with
tape and place it in a sturdy box.
8.
Repack the printer, paper trays, AC power cord and toner cartridge into the original ship-
ping box or boxes.
9.
Once the printer is in the new location, refer to the Installation Guide (included in the
original printer packaging) for installation instructions.
Storing the Printer for Long Periods of Time
If you will not be using the printer for several months, use the following procedure to prepare
the printer for storage:
1.
Turn the printer off by pressing the [ O ] on the power switch on the right side of the
printer.
2.
Unplug the AC power cord from the AC wall outlet.
3.
Disconnect the printer from the host computer.
4.
Remove the paper from all of the paper trays.
5.
If you will be storing the printer for six months or longer, remove the toner cartridge and
place it in an opaque plastic bag, and seal the bag with tape.
NOTE:
After prolonged inactivity the toner cartridge may degrade to the point where it is no longer usable
and must be replaced. Poor print quality and frequent paper jams may indicate that the toner has
solidified and that the drum has oxidized during storage.
6.
Cover the printer with a plastic sheet and tape down the corners.
7.
Store the printer in an area where the temperature and humidity are moderate, as
described in
NOTE:
Do not stack other items on top of the printer when storing the printer.
"Environment" on page
1-5.
Oct 02
Advertisement
Table of Contents
