Ps Menu - Oki B6100 User Manual

PS Menu

NOTE: Settings in your software application will override any settings in your printer driver.
Your printer driver settings will override any settings from the printer menu or printer front panel.
The PS Menu provides access to the PostScript settings. Use the following procedure to enter
the PS Menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text "PS Menu" is shown on the second line of the dis-
play.
3. Press the SELECT button to enter the PS menu.
4. Press the NEXT button to move through the submenus: Print PS Errors, and Manual
Feed TO.
5. Press the SELECT button to enter a submenu.
6. Use the procedures in the following table to access and change the PostScript settings:
Submenus
Print PS Errors
This submenu allows you
to choose to either print or
not print PS errors.
Manual Feed TO
This submenu allows you
to set the manual feed
timeout—the number of
seconds the printer should
wait for a manual feed. A
setting of 0 will cause
printer to wait indefinitely
for a manual feed.
Oct 02
Default Available Settings
Setting
Off On
Off
0 0 - 99999
Oki B6100 User Guide
Procedure for Changing Settings
1. Press NEXT or PREVIOUS to toggle between ON
(print) and OFF (do not print).
2. Press SELECT to save this setting.
1. Press NEXT or PREVIOUS to increase or
decrease each digit of the five-digit number.
2. Press SELECT to move to the next number.
3. Press SELECT after setting the last digit to save
the setting.
3-13
PS Menu