System Menu - Oki B6100 User Manual

System Menu

NOTE: Settings in your software application will override any settings in your printer driver.
Your printer driver settings will override any settings from the printer menu or printer front panel.
The system menu provides access to system settings. Use the following procedure to enter the
system menu:
1. Press the MENU button on the control panel.
2. Press the NEXT button until the text "System Menu" is shown on the second line of the
display.
3. Press the SELECT button to enter the system menu.
4. Press the NEXT button to move through the submenus: Factory Defaults, Display Lan-
guage, Power Saver, Wait Timeout, Job Timeout, Jam Recovery, and Hex Print.
5. Press the SELECT button to enter a submenu.
6. Use the procedures in the following table to access and change the system settings:
Submenus
Factory Defaults
This submenu allows you to reset the
printer to U.S. or Non-U.S. factory
defaults.
Display Language
This submenu allows you to change
the language of the display messages.
Power Saver
This submenu allows you to set the
number of minutes the printer is idle
before it reverts to Power Saver
Mode.
Wait Timeout
This submenu allows you to increase
or decrease the length of time (in
seconds) that the printer will remain
in the waiting state—a job is being
processed, no end-of-file has been
detected, and there is no more data to
process. This setting applies to both
PCL and PostScript print jobs.
Oct 02
Default Setting Available Settings
U.S. U.S.
Non-U.S.
English English
French
German
Italian
Spanish
15 0 - 999
20 0 - 99999
Oki B6100 User Guide
System Menu
Procedure for Changing Setting
1. Press NEXT or PREVIOUS to
toggles between U.S. and NON-U.S.
2. Press SELECT to choose and set the
factory defaults.
1. Press NEXT or PREVIOUS to scroll
through the available languages:
English, French (Francais), German
(Deutsch), Italian (Italiano), or
Spanish (Espanol).
2. Press SELECT to choose and set the
language.
1. Press NEXT or PREVIOUS to
increase or decrease the number of
minutes.
2. Press SELECT to save this setting.
1. Press NEXT or PREVIOUS to
increase or decrease each digit of the
five-digit number.
2. Press SELECT set one digit and
move to the next digit.
3. Press SELECT after changing the last
digit to save this setting.
3-17