Oki B6100 User Manual page 45

3. Slide the paper guides so they match the size of the paper that you are loading.
4. Stack the paper that you will load in the front tray, making sure that the edges are aligned
and neat. Position the paper stack so the surface to be printed faces up.
5. Load the stack of paper into the front tray by sliding the stack between the paper guides
and then pushing the paper stack into the tray until it will not go any further.
6. Check the paper stack to make sure it is not loaded at an angle and that the guides barely
touch the stack.
CAUTION: Do not press the guides tightly against the stack; the guides should just barely
touch the stack of paper. Paper guides that are too tight can cause feed jams.
Oct 02
Oki B6100 User Guide
Loading the Front Tray
2-21