Mixer - Pioneer DDJ-T1 Operating Instruction

3 Mixer

PUSH
GAIN GAIN
BROWSE VIEW
4
MAIN
MIN MAX MIN MAX
HI HI
VOL
1
MIN MAX
MIN MAX MIN MAX
MID MID
HEADPHONES
5
EQ EQ
MIX
MIN MAX MIN MAX
2
LOW LOW
CUE MASTER
VOL
MIN MAX MIN MAX
3
6
1 2 1 2
FX FX
MIN MAX
7
CUE CUE
8
SYNC MASTER SYNC MASTER
9
C A
10
9
8
7
6
5
4
3
2
1
a
0
OFF ON OFF ON
b
CH FADER START
c
1 MAIN VOL control
Adjusts the sound level output from the master.
2 HEADPHONES MIX control
Adjusts the monitor volume balance between the sound of the deck
for which the [CUE] button is pressed and the sound of [MASTER
OUT 1] and [MASTER OUT 2].
3 HEADPHONES VOL control
Adjusts the audio level output from the [PHONES] terminal.
4 GAIN control
Adjusts the sound level input to the various decks.
5 EQ (HI, MID, LOW) controls
These adjust the sound quality input to the various decks.
These adjust the [HI] (high range), [MID] (medium range) and [LOW]
(low range), respectively.
6 Effect assign buttons
Press the [1] or [2] button to assign TRAKTOR effect unit [FX 1] or
[FX 2] to the deck.
7 CUE button
The sound of decks for which the headphones [CUE] button is
pressed can be monitored over headphones.
When multiple headphones [CUE] buttons are pressed, the sound of
the decks for which the buttons are pressed is mixed and output from
the headphones.
8 SYNC button
The track on the deck for which the [SYNC] button is pressed is
synchronized to the [BPM] and [Beat Grid] of the deck for which the
[MASTER] button is pressed or of the master clock.
9 MASTER button
Sets the tempo of the deck for which the [MASTER] button is pressed
as the master for synchronizing with the beat sync function.
a Channel fader
Adjusts the sound level output from the various decks.
b CH FADER START switch
Switches the [CH FADER START] function on/ off.
GAIN GAIN
4
MIN MAX MIN MAX
HI HI
MIN MAX MIN MAX
MID MID
5
EQ EQ
MIN MAX MIN MAX
LOW LOW
MIN MAX MIN MAX
6
1 2 1 2
FX FX
7
CUE CUE
8
SYNC MASTER SYNC MASTER
9
B D
10
9
8
7
6
5
4
3
2
1
a
0
OFF ON OFF ON
b
1
2
3
5
6
a
4
7
c
When the [CH FADER START] switch is set to [ON], the fader start
and back cue functions can be used according to the movement of
the channel faders.
! Fader start: When the channel fader is moved from the front-
most position towards the back while pausing at the cue point,
playback starts immediately.
! Back cue: When the channel fader is returned from the back to
the front-most position, playback returns to the set cue point,
cues there, and the pause mode is set immediately.
c Crossfader
Switches the sound of the decks assigned to the left and right sides
of the crossfader for output.
The deck assignment can be changed with the [Deck Assign Button]
at the sides of the TRAKTOR crossfader.
Do not pull on the channel fader and crossfader knobs with excessive
force. The knobs are not designed to be removed. Pulling the knobs
strongly may result in damaging the unit.
8
9
19
En