Connecting The Input/ Output Terminals - Pioneer DDJ-T1 Operating Instruction

Front panel
1 PHONES terminal
Connect headphones here.
Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø
3.5 mm) can be used.
! The volume decreases when headphones are connected simulta-
neously to both the stereo phone jack and the stereo mini phone
jack.
2 AUX/ MIC selector switch
Switches the audio input between the external device and the
microphone.

Connecting the input/ output terminals

Rear panel
Component, amplifier,
powered speaker, etc.
To audio input
terminals
MASTER
R
OUT 1 (TRS)
 Cord hook
Hook the AC adapter's power cord in the top of the cord
hook, the USB cable in the bottom.
Fasten the AC adapter's power cord and USB cable in place by hooking
them on the cord hook. This prevents the power cord and USB cable from
being accidentally pulled and the plugs from being disconnected from
the terminals.
! The sound will be interrupted if the AC adapter or USB cable is
disconnected during playback.
Front panel
Headphones cord
14
En
1
PHONES
Portable audio device
R L R L
MAX
MIN
R L R L
L MASTER OUT 2 AUX IN VOL
To headphones
PHONES
— [AUX]: The external device connected to the [AUX] terminals is
selected.
— [MIC]: The microphone connected to the [MIC] terminal is
selected.
3 VOL control
Adjusts the audio level input to the [MIC] terminal.
4 MIC jack
Connect a microphone here.
! This cannot be used when operating on USB bus power.
Computer
TRAKTOR
To audio
output terminals
AC adapter's power cord
USB cable
Headphones
Microphone
2 3 4
INPUT SELECT
MIN
VOL
AUX MIC
AC adapter
(included)
USB ON OFF DC IN
To microphone Microphone cable
INPUT SELECT
MIN MAX
VOL
AUX MIC
MAX
MIC
To power outlet
USB ON OFF DC IN
Cord hook
MIC