Advertisement

SE-50
Instruction Manual

Advertisement

Table of Contents
loading

Summary of Contents for Saeco SE-50

  • Page 1 SE-50 Instruction Manual...
  • Page 2: Table Of Contents

    Contents SAECO‘s Safety Precautions Features of SE-50 Espresso Machine Preliminary steps before first start-up Beverage preparation Steam dispensing – Frothing milk for cappuccinos Hot water dispensing & Panel operation Instruction Advanced programming Troubleshooting Guide Care and cleaning continued Important instructions...
  • Page 3: Saeco's Safety Precautions

    SAECO ‘s Safety Precautions SAFETY PRECAUTIONS FOR YOUR SAECO ESPRESSO MACHINE • Always place the unit on a flat, level surface. • Always disconnect the plug from the power outlet prior to cleaning the espresso machine • Do not operate without water in reservoir.
  • Page 4 SE-50 Espresso Machine...
  • Page 5 1. Water tank 8. Filter holder 2. Warming plate 9. Programmable control panel 3. LCD display, low water indicator & timer 10.Steam control dial 4. Hot water control dial Temperature sensing steam wand 5. Hot water wand 12.Manual control 6. Brew Unit 13.Removable drip tray and grill 7.
  • Page 6: Preliminary Steps Before First Start-Up

    FEATURES Twins pump Allows you to texture milk and brew espresso at the same time. 15 BAR Italian espresso pump Triple thermoblocks with stainless steel tubing. PID technology controls water temperature precisely for both espresso and steam functions. Pre-infusion; 4 programs to choose from. Brass collar is durable and ideal for frequent use.
  • Page 7: Mineral Water Or Good

    3. Carefully rinse the tank and lid with water. 4. Carefully rinse the filter and filter holders. 5. Reposition the tank in the machine. 6. Fill with water, pour still mineral water or good quality potable drinking water into water tank. 2.5L 7.Reposition the lid and the water tank panel.
  • Page 8: Beverage Preparation

    Beverage preparation 1. Coffee dispensing Use the provided filter basket for 2 cups of coffee. Necessary condition: There must be enough water in the tank – and the machine must be at the correct pressure and right working temperature Scalding hazard! Warning: Do these steps very carefully. 2.
  • Page 9: Steam Dispensing - Frothing Milk For Cappuccinos

    Steam dispensing – Frothing milk for cappuccinos General instructions Milk is a delicate biological product that can easily sour, and it is modified by heat. When the milk carton is open and for its entire period of use, the milk must be kept at a temperature that does not exceed 5°C (41°F); Note: at the end of the workday (or, at least, no more than 24 hours after the carton is open), any remaining milk must be eliminated.
  • Page 10 Note: After using the steam After using the wand, carefully nozzle, clean the inside of clean the tube with a sponge the wand as follows: turn the or clean wash cloth. steam wand towards the cup warming tray and very carefully dispense steam from the steam wand at least once.
  • Page 11: Hot Water Dispensing

    Place a container beneath When the desired dose has been the hot water tube and turn reached, stop the hot water by turning the knob clockwise. the knob counterclockwise. SE-50 Panel operation Instruction Decrement Increment One-cup Two-cup Power Program...
  • Page 12: Advanced Programming

    4. Fill tank: remind user to fill tank 5. Check: when “CHECK” is flashing by flashing “NO WATER” when on screen which means the steam low water level in water tank knob, hot water knob or manual handle may not return to off position.
  • Page 13 3. Pre-infusion rate: adjust the pre-infusion rate (range: P1-P4) ; press “-” or “+” to change the setting and press “ ” to save 4. Cleaning reminder: Cleaning reminder: set the water usage limit for cleaning reminder,press “-” or “+” to change the setting and press “...
  • Page 14 Rotate the knob again and stop the steam emission. Remove the water tank, put 500 ml of Saeco Descaler into it and fill with fresh water up to MAX level. Confirm with “ ” button. Open the steam knob (on the right) and let the machine release steam untill the end of the procedure.
  • Page 15 2 - Coffee circuit descaling process Remove the filter holder, if it is positioned on the machine, and put a large container under the filter holder attachment. Press the “ ” button, select "CO CLEAN" and confirm with the “ ”...
  • Page 16 MODE \ BUTTON POWER PROGRAM flash PREHEAT READY 1 CUP COFFEE 2 CUP COFFEE MANUAL COFFEE STEAM HOT WATER 1 CUP VOLUME TUNING 2 CUP VOLUME TUNING flash if pressed flash if pressed PROGRAM SETTING looping on COFFEE PIPING CLEANING looping on STEAM PIPING CLEANING looping on...
  • Page 17: Troubleshooting Guide

    Troubleshooting Guide Problem Possible Cause Solution • Add water. Coffee does • No water in reservoir. • Grind medium ground coffee. not come out. • Coffee grind is too fine. • Fill filter with less coffee. • Too much coffee in the filter. •...
  • Page 18: Care And Cleaning

    Care and cleaning The coffee making process involves extract Should the holes in the filter baskets become oils out of coffee grinds to make espresso clogged with coffee grinds use a fine bristled coffee. Deposits of these oils build up over brush to remove them.
  • Page 19: Care And Cleaning Continued

    DESCALING about 5 minutes and you will find that after Use the Saeco descling product only this time the dry/caramelised milk will easily wipe away. Repeat process if still dirty. Disposal Do not dispose this product as unsorted municipal waste.

Table of Contents