Water Hardness; Filter - Siemens TK 64 Series Operating Manual

Water hardness

Ä Ä Ä Ä Ä Ä Ä Ä Ä
HARDNESS
Ä Ä Ä Ä Ä Ä Ä Ä Ä
WATER 1
Ä Ä Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä Ä Ä
HARDNESS
Ä Ä Ä Ä Ä Ä Ä Ä Ä
WATER 2
Ä Ä Ä Ä Ä Ä Ä Ä Ä
HARDNESS
WATER 3
HARDNESS
Ä Ä Ä Ä Ä Ä Ä Ä Ä
WATER 4
Ä Ä Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä Ä Ä

Filter

Ä Ä Ä Ä Ä Ä Ä Ä Ä
FILTER
Ä Ä Ä Ä Ä Ä Ä Ä Ä
YES/NEW
Ä Ä Ä Ä Ä Ä Ä Ä Ä
FILTER
NO/OLD
36
Downloaded from CoffeeMachineManual.com Manuals
The following other languages are available:
i
Ä Ä Ä Ä Ä Ä Ä Ä
LANGUAGE
Ä Ä Ä Ä Ä Ä Ä Ä
ENGLISH
Ä Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä Ä
LINGUA
Ä Ä Ä Ä Ä Ä Ä Ä
ITALIANO
Ä Ä Ä Ä Ä Ä Ä Ä
TAAL
Ä Ä Ä Ä Ä Ä Ä Ä
NEDERL.
Ä Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä Ä
JASYK
RUSSKIY
Ä Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä Ä
q Ascertain the water hardness with the supplied test strip,
e.g.:
q Hold down button
q Select HARDNESS WATER with < or>.
%
q Press button
q Select the ascertained hardness with < or >.
%
q Press button
q Press the & button. Back to standby.
Note: It is important for the descaling programme that the
water hardness is set correctly.
If external water softeners are used in the domestic water
system or if filtered water is used, select HARDNESS
WATER 1.
A filter 21 (order no. 46 1732) is available as an optional
accessory for the water tank 22. Follow the instructions
enclosed with the filter 21.
First insert filter 21, then change the appliance setting.
i
q Hold down button
q Select FILTER with< or >.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Press the & button. Back to standby.
Note: Change or remove used filter 21 as soon as system
message FILTER CHANGE is displayed! If a new filter
is not inserted, check that the appliance has been set to
FILTER n0/old and check the water hardness.
Ä Ä Ä Ä Ä Ä Ä Ä
LANGUE
Ä Ä Ä Ä Ä Ä Ä Ä
FRANCAIS
Ä Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä Ä
IDIOMA
Ä Ä Ä Ä Ä Ä Ä Ä
ESPANOL
Ä Ä Ä Ä Ä Ä Ä Ä
SPRAK
Ä Ä Ä Ä Ä Ä Ä Ä
SVENSKA
Ä Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä Ä
= hardness 2
%
on display 3 for at least 3 seconds.
until the number in the display flashes.
to save the setting.
%
on display 3 for at least 3 seconds.
until the display flashes.
to save the setting.