Setting The Language; Setting The Water Hardness; General Information - Siemens iQ500 TP5 Series User Manual

Fully automatic espresso machine
Table of Contents

Advertisement

Available languages

Available languages

en Before using for the first time
Do not use coffee beans that have
been treated with additives contain-
ing sugar.
Do not add ground coffee.
Open the lid.
1.
Fill with the coffee beans.
2.
The appliance will adjust to the cof-
fee beans with the next dispensing
process.
Close the lid.
3.
Tip: To keep the coffee beans at their
best, store them in a sealed container
in a cool place.
You can keep the coffee beans in the
bean container for a number of days
without them losing their aroma.

Setting the language

Press
to switch the appliance on.
1.
a The display will show the language
that is preset.
Press
or
2.
shows the desired language.
Press
⁠ .
3.
Tip: You can change the language at
any time.
→ "Overview of the basic settings",
Page 59

Setting the water hardness

It is important to set the water hardness
correctly, so that the appliance indic-
ates in good time that it needs descal-
ing. You can use the enclosed test strip
to determine the water hardness, or
ask your local water company.
Briefly dip the test strip in fresh tap
1.
water.
Allow the water to drip off the test
2.
strip.
a The test strip will indicate the water
hardness after 1 minute.
52
until the display
If a water softening system is in-
3.
stalled in your house, select "Soften-
ing system".
Press
or
4.
shows the desired water hardness.
The table shows the allocation of the
levels to the different degrees of wa-
ter hardness:
Level
German de-
grees in °dH
1
1-7
2
8-14
3
15-21
1
4
22-30
1
Factory setting (may vary according to
model)
Press
⁠ .
5.
Check whether the bean container
6.
has been filled.
Press
⁠ .
7.
a The appliance now rinses itself.
a When the symbols for drink selection
and the buttons light up on the oper-
ating panel, the appliance is ready
for use.
Tip: You can change the water hard-
ness at any time.
→ "Overview of the basic settings",
Page 59

General information

Please bear this information in mind so
that you can get the best out of your
appliance.
Notes
¡ The appliance has been pro-
grammed at the factory with stand-
ard settings for optimum operation.
¡ The grinder has been factory-set for
optimum operation. If coffee is only
dispensed drop by drop or is too
thin with too little crema, you can ad-
just the grinding level when the
until the display
Total hard-
ness in
(mmol/l)
0.18 - 1.25
1.42 - 2.49
2.67 - 3.74
3.92 - 5.34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq500 tp503d04

Table of Contents