Eliminating Minor Faults Yourself - Siemens TK 64 Series Operating Manual

Eliminating minor faults yourself

Fault
ADD BEANS is
displayed despite a full
bean container.
No hot water or steam
discharge.
Froth insufficient or too
runny.
Coffee is running a drop
at a time.
Coffee has no crema"
(layer of froth). (layer of froth)
Grind unit is not grinding
coffee beans.
Descaling programme
does not start.
Cleaning programme
does not start does not start.
Downloaded from CoffeeMachineManual.com Manuals
Cause
Grinder has still not been filled
automatically.
Nozzle 13 is blocked.
Rotary knob 13/a on inlet valve
13/b not secure.
Blocked inlet valve 13/b.
Unsuitable milk.
Degree of grinding too fine.
Preground coffee too fine.
Unsuitable type of coffee.
Beans no longer fresh.
Degree of grinding not
appropriate for coffee beans.
Beans are not falling into the
grinding unit (too oily).
Current programming set to:
FILTER YES/NEW or
FILTER CHANGE displayed.
System too hot.
System too hot.
FILTER CHANGE
displayed.
Remedial action
Press the 2 button 5.
Thoroughly clean nozzle 13.
Press the rotary knob 13/a
securely into the inlet valve 13/b.
Clean inlet valve 13/b.
Use cold semi skimmed milk.
Select a coarser degree of
grinding.
Use a coarser ground coffee.
Change the type of coffee.
Use fresh beans.
Optimise degree of grinding.
Gently tap the bean container.
Set programming to FILTER
NO/OLD - Never descale the
appliance while the filter is
inserted.
Draw off some of the hot water.
Draw off some of the hot water.
Change filter.
45