Energy Saving Mode; Displaying Number Of Brews; Reset Function; System Messages - Siemens TK 64 Series Operating Manual

Energy saving mode

OFF IN
4 HOURS
Ä Ä Ä Ä Ä Ä Ä Ä Ä
OFF IN
2 HOURS
Ä Ä Ä Ä Ä Ä Ä Ä Ä
Ä Ä Ä Ä Ä Ä Ä Ä Ä
Displaying number
of brews
NO.BREWS
- - - 86

RESET function

System messages

ADD
WATER WATER
ADD
BEANS BEANS
38
Downloaded from CoffeeMachineManual.com Manuals
This function is used to specify after how many hours
following the last brew the appliance automatically switches
to standby mode.
q Hold down button
q Select OFF IN with < or>.
%
q Press button
q Change the setting with < or >.
%
q Press button
q Press the & button. Back to standby.
The switch off time is retained even if there is a power
i
failure or the mains switch 1 is actuated.
The number of brewed espressos, coffees and preground
coffees is displayed here. The number of brews are counted
automatically.
q Hold down button
q Select NO.BREWS with< or>.
q Press the & button. Back to standby.
This number cannot be changed!
i
Possible from standby" mode only
q Simultaneously hold down < and > for at least
3 seconds all saved settings are deleted.
The appliance indicates processes and messages on
display 3.
Meaning
No water.
Note: There is always a small amount of water left in the water
tank 22.
Water tank 22 is missing
or not inserted correctly.
No coffee beans.
Note: The ADD BEANS display is lit until coffee is brewed
again.
%
on display 3 for at least 3 seconds.
, hours display flashes.
to save the setting.
%
on display 3 for at least 3 seconds.
Remedial action
Pour fresh, cold water into the
water tank 22.
Insert water tank 22.
Add coffee beans to the bean
container 15.