Advertisement
13. Lubricate an M10 x 75mm Bolt (5). Attach the
Backrest Brackets (38) to the Bench Frame (33)
with the Bolt and an M10 Nylon Locknut (4). Do not
overtighten the Nylon Locknut.
Rest the Backrest Brackets (38) on the Adjustment
Tube (37).
14. Attach the Seat (35) to the Bench Frame (33) with
two M6 x 16mm Screws (6).
15. Press 3/4" Round Inner Caps (25) into the ends of
all three Pad Tubes (27).
Insert a Pad Tube (27) through the indicated hole in
the Leg Lever (28). Insert another Pad Tube through
the other hole in the Leg Lever. Insert the remaining
Pad Tube through the hole in the Front Leg (20).
Slide two Foam Pads (26) onto each Pad Tube
(27).
13
37
38
33
5
Lubricate
14
35
33
6
15
26
28
27
26
25
27
25
26
27
20
26
10
16. Wet the ends of the Lat Bar (31) with soapy water.
Slide a Handgrip (39) onto each end of the Lat Bar.
Allow the Handgrips (39) to dry thoroughly
before using the Lat Bar (31).
17. Be sure that all parts have been tightened properly. The use of all remaining parts will be explained in
ADJUSTING THE WEIGHT BENCH beginning on page 12 of this manual.
4
26
16
39
31
39
11
Advertisement
