LENCO DVL-2460 User Manual page 5


Connect this product to the power outlet which has a protective earth connection.
LASER SAFETY
This set employs an optical laser beam system in the CD mechanism designed
with built-in safeguards. Do not attempt to disassemble. Exposure to this
invisible laser light beam may be harmful to the human eye. This is a Class-1
laser product. Use of controls, adjustments or procedures other than those
specified herein may result in hazardous laser light beam exposure. This
compact disc player should not be adjusted or repaired by anyone except
qualified service personnel. The laser mechanism in the set corresponds to the
stylus (needle) of a record player. Although this product uses a laser pick-up
lens, it is completely safe when operated according to directions.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications. Such modifications could void the user's authority to operate the
equipment.
1) Operate turning controls and switches as instructed in the manual.
2) Before turning on the power for the first time, make sure that the power adaptor is properly
installed.
3) Store your discs in a cool area to avoid damage from heat.
Battery Handling and Usage
 Keep batteries away from children and pets. Only adults should handle batteries.
 Never throw batteries into a fire or expose them to fire or other heat sources.
 Follow the battery safety and usage instructions.
DISC Handling and Maintenance
Handling precautions
Hold the disc by the edges so the surface will not be soiled with fingerprints. Fingerprints, dirt

and scratches can cause skipping and distortion.
Do not write on the label side with a ball-point pen or other writing utensils.

Do not use record cleaning sprays, benzene, thinner, static electricity prevention liquids.

Be careful not to drop or bend the disc.

Do not install more than 1 disc on the disc compartment.

Do not try to close the disc cover when the disc is not installed properly.

Be sure to store the disc in its exclusive case when not in use.

If the surface is soiled
Wipe gently with a soft, damp (water only) cloth.
When wiping discs, always move the cloth from the center hole toward the outside, which will
not cause distortion. (If you wipe the discs using a circular motion, circular scratches are likely to
occur, which will cause distortion.)
4