LENCO DVL-2460 User Manual page 25

16. Initial settings
Once the initial programming is entered it will be retained in the memory until changed, the player
can always be operated under the same conditions.
Common procedure for initial settings

Press D.SETUP on the remote control.

Use the navigation buttons to select a preferred item, and press the OK button, each screen
for setting the value is displayed. Then move the navigation buttons to set the item and press
OK to confirm the settings.

Press D.SETUP again to close the setup menu.

Use the LEFT or RIGHT navigation button to switch to another main setup item. Then press the RIGHT
or OK button to enter the submenu page; press LEFT to return to the previous menu page.
1. GENERAL
1.1. TV DISPLAY - It is for selecting TV output
mode.
Options:
a) Normal/PS: Pan & scan mode.
b) Normal/LB: Letter box mode.
c) Wide: 16:9 wide screen mode.
1.2. OSD LANG - It is used to choose your
desired OSD language.
1.3. SCREEN SAVER - If no operation is carried out for 5 minutes, screen saver will be displayed
on the screen when the SCREEN SAVER is ON.
1.4. LAST MEMORY - Enter another input source during DISC playback, and then back to the
DVD input source again, this unit will resume playback from the point where the last
playback was stopped, if the LAST MEMORY is ON.
24