LENCO DVL-2460 User Manual page 34

1.4. DTV Manual Tuning
- Press the OK or RIGHT navigation button to enter it.
- Use the LEFT/RIGHT navigation button to select the channel.
Then press OK to start searching.
1.5. Programme Edit
- Press the OK or RIGHT navigation button to enter it.
- Press the UP/DOWN navigation button to highlight your desired
channel.
- Press the RED button on the remote control to delete the
highlighted channel.
- Press the YELLOW button on the remote control to enter the
MOVE mode. Then use the UP/DOWN navigation button to
select the preferred position and press the YELLOW button
again to move it.
- Press the BLUE button on the remote control to skip the
highlighted channel.
-
Press the FAV button to set the current channel as a favorite
channel, and press the FAV button again to set it as a normal
channel.
1.6. Signal information (works under available TV signals)
This item is used to display signal details, for example: channel number and strength.
1.7. CI information (works under available TV signals)
When an available CAM (Conditional Access Module) card is connected to the CI slot, the users can
view related information or manage your CAM card.
33