LENCO DVL-2460 User Manual page 27

- Press the SOURCE button on the unit or remote control to switch the unit to ATV or DTV
mode.
SELECT DESIRED PROGRAM
1. Press CH+ to play the next channel.
2. Press CH- to play the previous channel.
3. Press the numbered buttons on the remote control directly to select your desired program.
NOTE: Press -/-- repeatedly to switch the digit.
VOLUME CONTROL
- Press VOL +/- to adjust the level of current volume.
Available range: 0-100.
MUTE CONTROL
- Press MUTE to mute the sound, press it again to turn on the sound.
SOURCE SETTING
- Press SOURCE on the unit or remote control to display the sources list.
- Press UP or DOWN to select your desired input source, and then press OK to confirm the
selection.
Available options: Satellite, DTV, ATV, AV, SCART, YPbPr, PC, HDMI, USB, DVD.
MULTIAUDIO SETTING
- Press AUDIO on the remote control and use the navigation buttons to select the desired audio
language.
NOTE: To enable this function, make sure that the channel you are viewing supports multi-audio
languages.
INFORMATION DISPLAY
- Press the DISPLAY button on the remote control to display information of the current program.
TV
26