Configuring Tcp/Ip Options - Oki OkiLAN 6120i User Manual

Configuring TCP/IP Options

To configure options specific to the TCP/IP protocol,
select the TCP/IP tab. The following screen will
display:
Fill in the following information:
IP Address Resolution
• Set Permanent - Select this option to make the IP
address permanent. If the OkiLAN 6120i has been
configured to remember its IP address, it does not
need to determine its address each time it is powered
on.
Enter the IP address for the OkiLAN 6120i. The IP
address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a
number from 0 to 255.
CAUTION: If you select an invalid IP address, you
may not be able to access the OkiLAN 6120i.
• Use Network Protocol - Select this option to use
RARP, BOOTP or DHCP to determine the IP address
at power up. Specify which protocol(s) to use.
OKI OkiLAN 6120i User's Guide
Section 4 - Chapter 4 - OkiNet for TCP/IP
IV - 25