Automatic Switch Off; The Heat Setting - AEG HK653320XB User Manual

26
Operating instructions

Automatic Switch Off

The function stops the hob automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after you activate the appliance.
• You spill something or put something on the control panel for more than 10 seconds, (a
pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove
the object or clean the control panel.
• The appliance become too hot (e.g. when, a saucepan boils dry). Before you use the hob
again, the cooking zone must be cool.
• You use not correct cookware. The symbol
vates automatically after 2 minutes.
• You do not deactivate a cooking zone or change the heat setting. After some time,
comes on and the appliance deactivates. See the table.
The times of Automatic Switch Off
Heat setting
The cooking zone
deactivates after

The heat setting

Touch the control bar at the heat setting. Change
to the left or the right, if it is necessary. Do not
release before you have a correct heat setting. The
display shows the heat setting.
Bridge function
The Bridge function connects two left side cooking zone and they operate as one.
First set the heat setting for one of the left cooking zone.
To start the Bridge function touch
left control sensors.
To stop the Bridge function touch
-
6 hours 5 hours
. To set or change the heat setting touch one of the
. The cooking zones operate independently.
comes on and the cooking zone deacti-
- -
4 hours
-
1.5 hours